BlogWolf

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

Salt generators sanitize your pool by converting salt into free chlorine which kills bacteria and algae. Chlorine will revert back to sodium chloride after killing bacteria. These reactions will continuously recycle virtually eliminating the need to add sanitizing chemicals to your pool. The only time you may need to add more salt to the pool is when water is replenished due to backwashing, draining or splashing (not evaporation). Salt water systems are a constant delivery of pure chlorine-based sanitizer.

Circulation of Pool Water

A salt generator is typically last in line in the cycle of water running through your swimming pool. It starts with the pump drawing water from the pool and pushing it into the filter to be cleaned of any debris. If there is a heating system, the water would run through that next until it makes its way into the salt generators where it’ll be sanitized and pushed out of the return and into the swimming pool. This operation replaces the tedious task of buying chemicals and pouring them into the pool, making for a simple and cost effective plan for the long term.

Ideal Chemical Levels

As with any pool, it is important that you maintain proper water chemistry of the pool water, including pH, alkaline content, and calcium levels. The only special requirement for HydroSalt is to maintain proper levels of salt and stabilizer. It is important to maintain these levels in order to prevent corrosion or scaling and to ensure maximum enjoyment of the pool. Test your water periodically.

Benefits

Control Panel

This control panel helps make the job easier when it comes to monitoring your water. If needed add salt or run your pump for sanitation.

No Chemical Irritation

Say goodbye to irritating chemicals such as chlorine! HydroSalt automatically sanitizes your pool through a process called electrolysis. Bacteria and algae are killed by the salt converting into free chlorine.

Relax, It’s Easy

The chemical reaction between the salt generator and the bacteria in your pool water makes it so you only need to add salt once.

Just Add Salt

The HydroSalt is an automatic chlorine generation system for pool & spa sanitation. The operation requires a low concentration of salt (sodium chloride) in the pool water at levels low enough that it normally cannot be tasted.

NO MORE CHLORINE SMELL – Enjoy the soft pool water while you’re swimming and nice silky smooth skin when you’re finish without ever having to worry about burning your eyes from too much chlorine. Compatible replacement for Hayward AquaRite Pro, SwimPure + with controls, H-40, and Goldline Controls AquaRite, , Aqua Rite XL, Aqua Plus, Aqua Logic, Pro Logic
SALT CHLORINE GENERATOR CELL – The HydroSalt automatically turns ordinary table salt into a regenerating supply of chlorine. No more mixing, measuring or storing liquid or tablet chlorine again. With fresh, natural chlorine circulated throughout your pool, you will see your chlorine costs being cut by 50% over time.
BENEFITS OF POOL SALT SYSTEM – Hydrosalt sanitizes your pool and leaves your skin clean and soft. Never worry about dry skin, green hair, burning eyes or the harsh chlorine smell when you swim. You will also see a savings of nearly 50% or more in chlorine costs.
HOW IT ALL WORKS – As water in your swimming pool enters the cell with the correct amount of dissolved salt, the cell then converts the dissolved salts into chlorine gas. The chlorine gas is then dissolved into the water and returned to the pool. Resulting in clean, krystal clear, odor free saltwater pool.
EASY TO INSTALL POOL EQUIPMENT – Installs onto any standard filtration systems for both new and existing pools. This cell comes pre-wired, allowing you to plug it into the control panel. You always want to confirm with your local code to be sure that you don’t need a certified electrician for installation. Included is a 14 foot cord and titanium plates that are made in the U.S.A.

[ad_2]